Fuji Xerox M268DW toner resetting method

Basic information:

Brand model: Fuji Xerox M268DW

Product type: A4 black and white laser multi-function machine (three-in-one), printing, copying and scanning

Printing conditions: 30 sheets/minute, 1200dpi maximum resolution, 64M memory

Maximum monthly printing volume: 10,000 pages

Product features: automatic WiFi (intelligent web page printing), automatic double-sided printing, copying, scanning.

Consumables type: drum-toner separation

Drum Unit: CT351056 (prints 12,000 pages, A4 paper @ 5% coverage)

Toner Cartridge: CT202331 (standard capacity 1,200 pages; high capacity 2,600 pages; A4 paper @ 5% coverage)

Working noise (dB): Printing: 51dB (A)

Power consumption: Ready/Standby: 60W

Toner Cartridge:

image of a Xerox M268 Toner Cartridge

Drum Unit:

image of a Xerox M268 Drum Unit

Toner Cartridge + Drum Unit:

image of a Xerox M268 Drun Cartridge

Method 1 for resetting after refilling toner to the cartridge:

1. Open the clip indicated by the arrow:

image of a Xerox M268 Toner Cartridge

2. Remove the side cover of the left gear end:

image of a Xerox M268 Toner Cartridge

3. Remove the gear shown in the figure:

image of a Xerox M268 Toner Cartridge

4. Install the gear indicated by the arrow as shown in the figure below:

image of a Xerox M268 Toner Cartridge

5. The correct installation position of the reset gear for resetting is shown in the arrow direction, as shown in the figure below:

image of a Xerox M268 Toner Cartridge

6. Install the gear end cover on the left end and see the correct reset gear position indicated by the arrow:

image of a Xerox M268 Toner Cartridge

Method 2 for resetting toner cartridge after refilling toner:

1. Open the front cover of the printer.

2. Press and hold the “OK” button for about 5 seconds until the screen displays “Replace the toner cartridge? Yes/No” (at this time, it will prompt whether to replace the toner cartridge, we don’t need to pay attention).

3. Press the “Start” button (the screen is bright but blank).

4. Press the “+” button [up arrow] (press +1 until the number becomes “11”).

5. Press the OK button (the screen displays “Accept”).

6. Close the front cover of the printer, the toner cartridge is reset and it can be used normally.

Resetting the drum unit:

Open the front cover of the printer.

Press and hold the “OK” button for about 5 seconds until the screen displays “Replace the Drum Unit? Yes/No.”

Select “Yes” to accept. Then, drum unit is reset.