How to reset toner on Brother HL-L2365DW?

When the screen of Brother HL-L2365DW printer prompts “Replace Toner”, it may be that your printer toner is about to run out or has run out. At this time, you need to refill toner powder or replace toner cartridge. When the replacement is completed, you need to reset your printer. The specific operation method is shared with you, hoping to help you!

How to reset the toner cartridge of Brother HL-L2365DW printer?:

1. Open the front cover and turn off the power of the printer.

2. Press and hold the [Go] button, then press the [Power Switch] button. When a black progress bar appears on the printer screen, release the [Go] button and the [Power Switch] button at the same time.

3. At this time, the [Users Mode] button will be displayed on the printer screen.

4. Press the [Go] button 9 times, and the light (Network) will flash each time. After pressing it 9 times, the light of the [WiFi] button will flash.

5. Press the [Go] button 5 more times, and the light (Network) will flash each time. The printer will automatically restart once.

6. After the printer restarts, close the front cover.

How to reset the drum of Brother HL-L2365DW printer? Brother HL-L2365DW drum reset:

Method 1:

1. Make sure the front cover of the printer is open.

2. Press OK on the machine for more than 2 seconds until “Drum Unit” is displayed, then press OK.

3. Press the ▲ key to display reset, then reset the drum counter.

4. Close the front cover.

Method 2:

1. Open the front cover and turn off the power, or turn off the power and open the front cover.

2. Press the start key (Go) without releasing it, turn on the power at the same time (at this time, the light (Network) is always on), then release the start key (Go). (At this time, Users Mode appears on the screen).

3. Press the start key (Go) 9 times in a row, and the light (Network) flashes each time.

4. Wait for a while, and the light (Network) flashes.

5. Press the start key (Go) 3 more times, and the light (Network) flashes each time.

6. Wait for a while, the screen will show “Please Wait” (at this time, the printer will make a sound), and the screen will change to Cover is open, and the process is complete.

7. Close the front cover, and the toner cartridge is reseted.