I. Introduction

As an important device widely used in various fields, Konica Minolta printers will inevitably encounter various faults during use. This article will provide you with a complete list of fault codes for Konica Minolta printers, hoping to be helpful to you.

China-Toner-Cartridge-Suppliers

II. List of error codes

1. E101

Error description: Unable to connect to the motherboard.

Solution: Check and connect the motherboard.

2. E102

Error description: Unable to connect to the LCD board.

Solution: Check and connect the LCD board.

3. E103

Error description: The printer does not rotate smoothly.

Solution: Clean the roller and check the motor.

4. E104

Error description: Sensor error.

Solution: Check and replace the sensor.

5. E105

Error description: The printer is out of paper.

Solution: Add paper or replace the paper roll.

6. E106

Error description: The paper type is not supported.

Solution: Replace the appropriate paper.

7. E107

Fault description: Paper jam.

Solution: Clear the paper jam point.

8. E108

Error description: Printer temperature is too high.

Solution: Stop the machine to cool down, check the cooling system.

9. E109

Error description: Printer voltage is too low.

Solution: Check the power supply voltage and power supply cable.

10. E110

Error description: Printer capacitor is damaged.

Solution: Replace the capacitor.

 

III. Conclusion

The above is a complete list of Konica Minolta printer error codes. When you encounter a Konica Minolta printer problem, you can check and solve it according to the above fault codes. If the problem still cannot be solved, please contact the manufacturer’s customer service for further consultation and support.