Sharp MX-4608N copier maintenance mode entry method and carrier initialization method

Sharp MX-4608N copier maintenance mode entry method:

CA—–#/P—–*—–C—–*, then press the “copy” key to enter the maintenance mode

Sharp MX-4608N copier developer initialization method:

1. CA—–#/P—–*—–C—–*, then press the “copy” key to enter the maintenance mode

2. Enter 25, then press the “copy” key

3. Enter 2, then press the “copy” key

4. At this time, open the front door of the copier, take out the toner cartridge, and then close the front door (be sure to take out the toner cartridge before executing)

image of a Sharp MX-4608N Copier

5. Press “K” on the copier screen, then press “EXECUTE” on the copier screen

image of Sharp MX-4608N

6. At this time, the copier developer starts to operate, and the value displayed on the screen will change. After the operation is completed, turn off the copier and turn it on again

Developer initialization on Sharp M3658N/M4658N/5658N/M3068N/M4608N/M5608N/M364N/M365N/464N/46N/564N/565N same steps as above.